T H E   I N S P E C T I O N

B1). The Inspection is a general surface examination of those parts of the Property which are accessible: in other words, visible and readily available for examination from ground and floor levels, without risk of causing damage to the Property or injury to the Surveyor. Due care is therefore exercised throughout the Inspection regarding safety, practicality and the constraints of being a visitor to the Property (which may be occupied). So furniture, floor coverings and other contents are not moved or lifted; and no part is forced or laid open to make it accessible.

B2). The services are inspected (except, in the case of flats, for drainage, lifts and security systems), but the Surveyor does not test or assess the efficiency of electrical, gas, plumbing, heating or drainage installations, or compliance with current regulations, or the internal condition of any chimney, boiler or other flue. Also, the Surveyor does not research the presence (or possible consequences) of contamination by any harmful substance. However, if a problem is suspected in any of these areas, advice is given on what action should be taken.

B3). Where necessary, parts of the Inspection are made from adjoining public property. Such equipment as a damp-meter, binoculars and torch may be used. A ladder is used for hatches and also for flat roofs not more than three metres above ground level. Leisure facilities and non-permanent outbuildings (such as pools and timber sheds) are noted but not examined. In the case of flats, exterior surfaces of the building containing the Property, as well as its access areas, are examined in order to assess their general condition; roof spaces are inspected if there is a hatch within the flat.